How to change the screen glass on Moto G Fast XT2045-3

All the news on Moto G Fast XT2045-3 in our articles.

How do i change the screen glass on Moto G Fast XT2045-3?

It happens to everyone to inadvertently drop his Moto G Fast XT2045-3.

Sometimes your device may not suffer any damage and other times the damage is noticeable.

The most frequent breakage is that of the glass.

It is relatively annoying to have the glass of your Moto G Fast XT2045-3 broken and going to repair your smartphone at an authorized repairer can be relatively expensive, especially for small budgets.

That's why we decided to write this tutorial to help you repair the glass of your Moto G Fast XT2045-3 by your own means.

Through this tutorial, we will show you how to change the screen glass on your Moto G Fast XT2045-3. We will explain all the steps to successfully change the glass.

Prerequisites for changing the screen glass on your Moto G Fast XT2045-3

Given the price at an authorized repairer to change the broken glass of your Moto G Fast XT2045-3 which can amount to around 70 € depending on where you are going, we therefore offer you this tutorial to repair the glass yourself.

To start the repair, you need to purchase the tools.

You just have to type “Moto G Fast XT2045-3 Toolkit” in your favorite search engine. This kit must consist of several tools: a screwdriver, a suction cup, a spatula, pliers, a SIM / SD card ejector and finally a microfiber cloth to clean your window.

Also, if the glass is not sold with the kit, then don't forget to order it.

You just have to type “Moto G Fast XT2045-3 Glass” and you will find a wide choice. You should have a total of less than 30 €, which is half the amount of an authorized repairer. Once you have all of these items, then you can start the repair the glass of your Moto G Fast XT2045-3.

Step one: disassemble your Moto G Fast XT2045-3

To avoid damaging your Moto G Fast XT2045-3, turn it off before starting the glass repair.

You must start by removing the back shell of your Moto G Fast XT2045-3 using the spatula provided in the kit. Then, always remove the battery and the SIM card from your device using the spatula.

Then, you will have to remove the screws one by one using the screwdriver and then carefully remove the cover that surrounds your Moto G Fast XT2045-3 using the spatula, to avoid damaging the components located below.

Then, gently remove the tablecloth still using a spatula.

The cable is a large orange wire located at the top of your Moto G Fast XT2045-3, which connects the motherboard to the touch screen.

You have already completed your Moto G Fast XT2045-3 disassembling.

Step two: remove and put the glass on your Moto G Fast XT2045-3

Remove the glass from your Moto G Fast XT2045-3

During this step, be as careful and attentive as possible.

To be able to easily remove the glass, you simply have to heat the edges of your Moto G Fast XT2045-3 with a hair dryer for about 5 minutes in order to soften the glue.

Then use the spatula to carefully remove the screen. You can also use the suction cup to help remove the glass.

Put the new glass on your Moto G Fast XT2045-3

We are coming to the end of this tutorial soon. Before placing the new window, remove the film that protects the window and clean it with the microfiber cloth in order to remove all impurities.

Then, you just have to place the new glass in the same way as the old glass was installed.

Finally, press down on the glass of your Moto G Fast XT2045-3 so that the glue, which you have softened, sticks to the new screen.

Do not press too hard in order to avoid breaking it.

Step three: reassemble your Moto G Fast XT2045-3

You have reached the last step of this tutorial. You must now reassemble your Moto G Fast XT2045-3. Start by reconnecting the cable, then install the cover that protected all the components.

Then, take your screwdriver to put the screws back in place.

Finally, put the battery and the SIM card back in their places and replace the back cover of your device. You have finished the manipulation. All you have to do is turn on your Moto G Fast XT2045-3 to see if you have successfully completed the tutorial. We hope we were able to help you as best as possible.

If you encounter any difficulties, do not hesitate to ask a friend who is an expert in technology, who will be able to help you in this operation to change the screen glass on your Moto G Fast XT2045-3.

Find all our articles on Moto G Fast XT2045-3 to help you.